| Customization: | Available |
|---|---|
| After-sales Service: | Engineers Available to Service Machinery Overseas |
| Warranty: | 18 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product principle
The raw material of oxygen plant is air, the product is high purity oxygen, not only can be used as industrial oxygen can also be used for medical oxygen. Oxygen plant in the process of work without any emissions, and the only consumables is electricity. Oxygen generator is mainly composed of seven parts: air compressor, Pre-cooler, purification system(Purifier), expander, Rectification column, liquid pump, oxygen filling station.
The process is as follows:
Clean air via air compressor compressed to 1.05 MPa, and then into the Pre-cooler cold to 5-10 ºC or so, after the separation of water, into the purification system, adsorb the composition is contained in compressed air, such as acetylene, carbon dioxide and water. Clean and dry compressed air has entered the Rectification column heat exchanger, according to the three states of the material physical properties, separate the oxygen and nitrogen .After separation of the oxygen products by liquid oxygen pump compression pressure rise to the pressure of the user need, then pass through heat exchanger again, out of the coloumn, then through oxygen filling machine fill into the bottle or delivery to user site by pipe directly.
| Gas Oxygen output: | ~Nm3/h (Customized) | Starting time: | ~8h |
| Oxygen Purity: | 99.6% | Total power: | ~KW (Subject to the final design) |
| Working pressure: | <1.05Mpa | Power supply: | 380V/220V/50Hz (As reference only) |
| Air compressor | Pre-cooling unit | Purification unit |
1. Each unit machine is skid-mounted construction, connected by fixed-size short pipe. the whole set of plant with all pipes and valve together are delivered to the User's site, the Users needn't to buy any additional spare part by themselves, we ensure the plant's perfect and integrate.
2. The User only need prepare well the workshop, keep the ground level is ok.
3. Adopting liquid oxygen pump inner-compress technology, we can produce high-quality medical oxygen with purity range in 99.6-99.9%. The high quality oxygen products comply with the medical oxygen standard, widely used in medical and industrial area.
4. Small volume.
5. Complete set of plant is installed without foundation, it has following advantages: stable running, easy operation, convenient maintenance, without easy-damaged spare parts within two years.
6. To ensure all valves' quality, we adopt the best-quality valve in Air separation Industry produced as the cold-valve in the Rectification column. We adopt stainless steel valve as the Purifier valve, and also install thermostability mat in the stainless steel valve to ensure that the valve is of little wear, no cooling leak, no gas leak, long life in the long-term running.
7. Advanced technology adopted in each unit can reduce power consumption greatly, and save electricity fee at the same time.
8. Complete set of plant could be transported by car easily to suburban and faraway district. That can satisfy customer's oxygen requirements in time in different areas.
9. It only takes about 15-20 days for the installation and commissioning.
10. The pipes used in the Purifier, including the connecting pipes between Purifier to Rectification column are in the conditions of cold-heat changing alternately. The temperature changes range from 5ºC~200ºC. When temperature is low, condensing-water corrode pipe, while the temperature is high, the pipe oxidized seriously. To ensure the life of connecting pipe, and safety of plant, we have made heat insulation treatment on all the pipes.
11. To ensure the safe running of the plant, we equip four-stage pipe oil-filter to ensure that no oil can enter purifier and rectification column. The pressure-difference meter in the four-stage pipe can also show the oil quantity to inform us to change the filter core, ensure the safety of follow-up plant. All filters are equipped with pressure-difference meter, we can judge the degreasing effect and the best time to change filter core, in this way we can prevent oil entering system after the filter core lose efficacy.
Q1: What is your company specialized in?
-We're a professional engaged in air separation plant, dissolved acetylene plant, chemical tail gas recycling equipment, food grade CO2 equipment, liquefied natural gas equipment, design, research and development, manufacture and after-sales service as one of technological innovation-oriented enterprises.
Q2: Are you a manufacturing factory or trading company?
-We are professional manufacturer.
Q3: Where is your factory located?
-We're located in Shenglong industrial park, Handan city, Heibei province of China.
Q4: Are the critical components manufactured and assembled by yourself?
-Yes, the critical components are manufactured and assembled by ourselves.
Q5: Is your equipment easy to break?
-No, our equipment has long life service and it's not easy to break.
Q6: Is your equipment easy to install and operate?
-Yes, our equipment is skid-mounted, it's very easy to install and easy to operate as well.
Q7: Can you help calculate ROI on your product?
-Yes, we can calculate ROI for you with the necessary documents demanded.
){kind=link}